Help
Help centre
Short guides, step by step, with the names of the buttons as you see them. Pick your optimiser or search below. Paid for Pro and do not see it on this device? Bring it back yourself in one step with the e-mail you paid with.
Nothing found with those words. Try another word, or write to us below. Contact →
Glass cutting optimiser
Sheets of glass: your list, the sheet, the rack of offcuts and the plan.
Paste or open your list5 steps
Bring your sizes in from a spreadsheet, a file or a message instead of typing them.
- Open the glass optimiser. It opens with an example list: press Clear it and start with mine to start from an empty one.
- Copy the rows of your spreadsheet (width, height and how many) and press Paste your list.
- Paste them in the box and press Replace the list, or Add to it to keep the sizes already there.
- For a CSV, TSV, TXT or Excel (.xlsx) file, press Open a file or drop the file on the list. Download a template gives you one with the columns in place.
- To type instead, write width, height and how many in the row; Add a size adds another row.
What you see: The plan under the list is worked out again as you type: there is no button to calculate.
Choose the sheet and keep your usual size4 steps
Work on the sheet you buy, and have the page open on it every time.
- Open the Sheet settings, above the plan: the line shows the size in use.
- Pick one in Standard size (jumbo, DLF, half, quarter), or My own size… and type the width and height.
- Press Always use this size: the next time the optimiser opens on that sheet, also on the example.
- The last sizes you worked with appear under Your last:; one tap puts one back. Remove forgets the usual size.
What you see: The line of the settings shows the new size and the plan is drawn again on it.
Edge trim and breakout4 steps
Allow for the rim you cannot use and the strip lost at each snap.
- Open Trim and breakout.
- In Edge trim, each side type the damaged rim of the sheet you cannot use, in millimetres.
- In Breakout width between cuts type the strip you lose between two pieces when you snap them apart. At zero the plan comes out optimistic.
- If you want a warning for strips too narrow to snap, type the width in Warn about panes narrower than.
What you see: The line of the fold shows both figures (for example 10 mm · 4 mm) and the plan uses them at once.
Cut from the offcuts you already have5 steps
Put your offcuts on the rack so the order is cut from them before a new sheet.
- Open Offcut rack and leave Cut from the rack first on.
- Type the width and height of an offcut and press Put it on the rack. One by one, as many as you keep.
- In Glass price and type, write in What this glass is the glass of the order (for example 6 clear): the rack only offers offcuts of the same glass.
- The plan takes pieces out of the rack before it buys a sheet.
- When the order is cut, press Mark this order as cut: the offcuts used leave the rack and the new ones go on it. Nothing changes until you press it.
What you see: The line of the fold counts the offcuts on the rack, and the result says how much glass goes back to it.
Read the plan: yield, waste and what to order5 steps
Know how many sheets to buy and how good the cut is.
- The plan is drawn again each time you change the list or a setting.
- Each sheet is drawn with its pieces, the cuts numbered in order and the offcuts hatched; the numbered buttons go from one sheet to the next.
- Yield is the glass that ends up in pieces out of the glass bought. Waste is the rest, and what goes back to the rack as offcuts is counted apart.
- The line To order says how many sheets to buy and of what size. Sheets to order from the supplier lays out the order and Copy the order copies it.
- Show the working opens the arithmetic behind each figure.
What you see: A piece that does not fit is marked in its row, with the smallest sheet that takes it.
Print the cutting plan4 steps
Take the plan to the cutting table on paper or as a PDF.
- With the plan on screen, press Print the cutting plan.
- The plan page opens with your order. Fill in Job reference and Customer or site if you want them on the paper.
- Press Print the plan and choose your printer, or save it as a PDF.
- On a black-and-white printer each piece keeps its own pattern and the offcuts are hatched: there is nothing to set.
What you see: The paper carries a drawing of each sheet with its pieces, the cuts in the order the table makes them and every offcut with its size.
Open the glass optimiser →The cutting plan pageLink to this guide
Print a label for every pane4 steps
Label each piece with its code and size, on A4 sheets or a label printer.
- With the plan on screen, press Labels for every pane.
- Choose the Label size: plain A4 sheets or the roll of a label printer.
- Tick what each label carries, such as the QR code on each label.
- Press Preview before printing to check them, then Print the labels.
What you see: Each label carries the piece's reference, size and QR code.
Save an order and open it again5 steps
Keep an order under a name and come back to it another day.
- Press Save this order beside the plan. With no name typed, it is named by the day and the hour.
- To give it a name, open Saved orders, type it in Name this order and press Save the order.
- Another day, the line Your orders above the list shows what you saved: press Open on one.
- You can also open Saved orders and tap its name. Recent orders in this browser keeps the last orders worked out, saved or not.
- To pass it to someone or to another device, press More options and Copy a link to this order: the list travels inside the link.
What you see: The order comes back as you left it: the sheet, the trim, the price and the whole list.
Work in inches4 steps
Type sizes in inches and sixteenths.
- Open the Sheet settings.
- Press Inches (in).
- Type the sizes in inches, with a fraction if you like: 24 1/8, 24-1/8 or 24.125.
- Pick an inch sheet in Standard size or type your own. Millimetres (mm) switches back.
What you see: The list, the sheet, the trim and the offcuts are typed and shown in inches.
Panel cutting optimiser
Boards of melamine, MDF or plywood: parts, grain, saw and plan.
Paste or open your list of parts5 steps
Bring your parts in from a spreadsheet, a file or WhatsApp.
- Open the panel optimiser. It opens with an example: press Clear it and start with mine for an empty list.
- Press Paste your list (or open Paste a list from a spreadsheet or WhatsApp) and paste one part per line: reference, length, width, quantity and grain.
- Length is the side that runs with the grain. Put y in the last column for the parts that must keep the grain.
- For a CSV, TSV, TXT or Excel file, press Open a file; Download a template gives you the columns in place.
- To type instead, use the rows of the table; Add a part adds one.
What you see: The plan is worked out again as you type, and under the box the page says how it read your lines.
Choose the board and keep your usual size4 steps
Work on the board you buy, and have the page open on it every time.
- Open Sheet and sizes.
- Pick one in Usual sheet formats, or type the length and width of your board.
- In Board say whether the board has grain or is plain.
- Press Always use this size to open on this board next time. Remove forgets it.
What you see: The line of the fold shows the board in use and the plan is drawn again on it.
Saw kerf and trim4 steps
Tell the plan what the blade takes and what you trim off the board.
- Open Saw and trim.
- In Kerf — blade width type the thickness of your blade, in millimetres.
- In Trim on each edge type what you cut off each edge of the board. If the long edges take a different trim, type it in Trim on the long edges; left empty, the same trim goes on all four.
- In Keep offcuts from type the smallest offcut you keep: both sides at least that long. Smaller ones count as waste.
What you see: The line of the fold shows the three figures (for example 4 mm · 10 mm · 300 mm).
Cut from the offcuts you already have4 steps
Use the offcuts standing against the wall before buying a new board.
- Open Offcut rack and write the Material of this job in your own words (for example 16 white melamine).
- Leave Cut from the rack first on Yes.
- Type the length and width of an offcut and press Add to the rack. One by one, as many as you keep.
- When the plan is made and the job cut, press It is cut: update the rack: the offcuts used leave the rack and the new ones go on it.
What you see: The rack lists the offcuts of this material, and the plan cuts from them first when that saves a board.
Read the plan and what to order5 steps
Know how many boards to buy and how each one is cut.
- The plan is drawn again each time you change the list or a setting.
- At the top, Used is the share of the boards that ends up in parts and Waste the rest.
- Each board is drawn with its parts and its percentage used; ↻ marks a part turned.
- The line To order says how many boards to buy and of what size.
- Show the working opens the arithmetic behind each figure.
What you see: If you give prices in Edge banding and cost, the metres of edge tape and the cost of the job are worked out too.
Print the plan and the labels4 steps
Take the plan to the saw and label every part.
- Press Print the cutting plan: the print window opens with the plan. Choose your printer, or save it as a PDF.
- On a black-and-white printer each part keeps its own pattern and the offcuts are hatched: there is nothing to set.
- For labels, choose the Label size (A4 sheet or label printer) and press Print labels for the pieces.
- To send the plan to someone, press Copy the link or Send by WhatsApp.
What you see: The paper carries each board with its parts, ready for the saw.
Save a job and open it again4 steps
Keep a job under a name, and your board and saw for every job.
- Type a Job name and press Save this job.
- Another day, the line Your jobs above the list shows what you saved: press Open on one.
- To keep your board and your saw for every job, press Save the stock and saw as…; later choose it in Your stock and press Use.
- The list you are working on also stays in this browser, so it is still there when you come back.
What you see: The job comes back as you left it: the board, the saw and the cutting list.
Work in inches4 steps
Type parts and boards in inches.
- Open Units.
- Press Imperial — inches.
- Type lengths and widths in inches; Usual sheet formats includes inch boards (96 × 48 in and others).
- Metric — mm switches back.
What you see: The parts, the board and the saw are typed and shown in inches.
Linear cutting optimiser
Bars, tubes and profiles: lengths, saw kerf and offcuts.
Paste or open your list of cuts4 steps
Bring your lengths in from a spreadsheet, a file or a message.
- Open the linear optimiser. It opens with an example: press Clear to empty the list.
- Press Paste your list and paste one piece per line: reference, length and quantity, straight from a spreadsheet or typed with spaces.
- A blank quantity counts as 1, and a header row is skipped.
- For a CSV, TSV, TXT or Excel file, press Open a file; Download a template gives you the columns in place.
What you see: The plan is worked out again as you type, and under the box the page says how it read your lines.
Bar length, and other lengths you can buy3 steps
Work on the bars you buy, mixing lengths if your supplier has them.
- Open Bars.
- In Bar length you buy type the length of the stock bar, for example 6000.
- If you can buy other lengths, type them in Other bar lengths you can buy, separated by spaces: each bar takes whichever length it uses best.
What you see: The line of the fold shows the length in use, and the result says how many bars of each length to buy.
Saw kerf and end trim4 steps
Tell the plan what the blade takes and what you cut off the ends.
- Open Saw.
- In Kerf — blade width type the thickness of your blade, in millimetres.
- In Trim at each end type what you cut off each end of the bar.
- In Keep offcuts from type the shortest offcut you keep; shorter ends count as waste.
What you see: The line of the fold shows the three figures (for example 3 mm · 10 mm · 500 mm).
Cut from the offcuts you already have3 steps
Use the bar ends on your rack before cutting a new bar.
- Open Bars.
- In Offcuts already on the rack write one per line: the length and how many.
- The plan uses them when they save a new bar or material, and the result says how many it took.
What you see: The title of the result counts the offcuts used beside the new bars.
Read the plan and what to buy5 steps
Know how many bars to buy and which pieces go on each.
- The plan is drawn again each time you change the list or a setting.
- The title says how many pieces come from how many bars of what length: that is what to buy.
- Used is the share of the bars that ends up in pieces and Waste the rest.
- Each bar is drawn with its pieces and its offcut; identical bars are listed once, with how many to cut.
- Show the working opens the arithmetic behind each figure.
What you see: When a whole bar could be ordered less, the page says so under the result.
Print the cut list and the labels3 steps
Take the list to the saw and label every piece.
- Press Print the cut list: the print window opens with the list. Choose your printer, or save it as a PDF.
- On a black-and-white printer each piece keeps its own pattern and the offcuts are hatched: there is nothing to set.
- For labels, choose the Label size (A4 sheet or label printer) and press Print labels for the pieces.
What you see: The paper carries each bar with its pieces, under a line with the bars to buy, the kerf and the trim.
Save a job and open it again4 steps
Keep a job under a name, and your bars and saw for every job.
- Type a Job name and press Save this job.
- Another day, the line Your jobs above the list shows what you saved: press Open on one.
- To keep your bars and your saw for every job, press Save the stock and saw as…; later choose it in Your stock and press Use.
- The list you are working on also stays in this browser, so it is still there when you come back.
What you see: The job comes back as you left it: the bars, the saw and the cutting list.
Work in inches4 steps
Type lengths in inches and read them as a tape does.
- Open Units.
- Press Imperial — inches.
- Type the lengths in inches. The plan writes them as a tape reads, to the sixteenth: 7' 3 1/2".
- Metric — mm switches back.
What you see: The list, the bars, the labels and the order are in inches.
Pro, payments and devices
Buying, the invoice, another device, cancelling and changing your mind.
Buy Pro and get the invoice4 steps
What happens when you pay, and what to keep.
- Open the pricing page (link below) and press the button to unlock Pro.
- Stripe's payment page opens. Give the e-mail where you want the receipt; for a company invoice, type its tax or VAT number there before you pay.
- Pay. Back on SyntaxFlow, Pro is on in this browser; no account is needed.
- Keep that e-mail: with it you bring Pro back on another device.
What you see: The PDF invoice arrives by itself at the e-mail you gave.
New computer or phone: what happens to Pro and to my work?
Pro bought without an account stays in the browser you paid in. On the new device, sign in if you made an account when you paid, or restore Pro with the e-mail you paid with. Your work (saved jobs, the offcut rack, projects) lives in the browser: move it with a backup from My data, or switch on sync in your account and it stays the same on all your devices.
How do I get Pro back?
On Restore Pro, with the e-mail you paid with and the last four digits of the card, or the receipt number Stripe e-mailed you (it works with any payment method). It is checked with Stripe there and then, and Pro comes back to that browser. If you are signed in to your account while you do it, the purchase is kept in the account and you will not have to repeat it on other devices. After several failed tries with one e-mail, wait an hour.
An invoice with my company's tax or VAT number
The PDF invoice arrives by itself at the e-mail you give when paying. For it to carry your company's tax or VAT number, type it on Stripe's payment page before you pay, and give the e-mail of whoever does the accounts. If you missed it, write to us from the e-mail of the purchase with the receipt number and the tax number.
What is free and what is Pro?
Every calculator and the three cutting optimisers are free, with no account and no limit on calculations. Pro (€29 once, no subscription) lifts the limits on what comes out of them: every label instead of 12, a rack of 400 offcuts instead of 25, 50 saved jobs instead of 1, the cutting plan without the SyntaxFlow line, calculator reports with your logo, lists longer than 5 rows, saving without limit and the Excel file. Pro changes no calculation. The full table is on Pricing.
Plan Taller: what it is and how to cancel
It is everything in Pro plus the photos and files of your surveys and job reports synced between the phone and the workshop. It costs €19 a month including VAT, needs an account, and the first 7 days are not charged. You cancel online whenever you like, from your account («Manage or cancel the subscription») or from the Plan Taller page: cancel within those 7 days and nothing is charged; cancel later and you keep it to the end of the month already paid. For the Plan Taller, write to [email protected].
Changing your mind: 14 days
You have 14 calendar days from the purchase or the subscription to withdraw, without giving a reason and even if you have used it, and you get back everything you paid. On the Plan Taller, the first 7 days not charged count within those 14. Do it on Withdraw from the contract. If you paid and Pro did not unlock, or you were charged twice, you get it all back, whenever that is.
Your data
Where your lists live and when they leave your browser.
What happens to your lists4 steps
Nothing you type leaves your browser unless you send it.
- The plan is worked out in your browser: the list you type or paste is not sent to us while you calculate.
- Lists, saved jobs, the rack and your settings are kept in this browser, on this device.
- They leave it only when you do it: a link you copy or send by WhatsApp (the list goes inside the link, never your prices), a file you save, or your account's sync if you switch it on.
- To take your work to another device, make a backup in My data or switch on sync in your account.
What you see: The privacy policy lists every key the site keeps in your browser.
Download the list for the panel saw or in Excel5 steps
Take the list to the cutting machine or to a spreadsheet without typing it again.
- Work out the plan in the glass, panel or bar optimiser.
- On panels and bars, press Download the list beside the plan's buttons. On glass, open More options under the plan.
- List for the panel saw (CSV) on panels, List for the cutting machine (CSV) on glass or Cut list (CSV) on bars downloads the list: reference, length, width, quantity, grain or do not rotate, edges and material. It is free.
- Plan and list in Excel (.xlsx) downloads one workbook with the list, the plan piece by piece and the summary. It comes with Pro.
- In the machine's program, say which column holds each figure. The CSV uses the separator and the decimal sign Excel expects in your language.
What you see: The file is made in your browser and goes to your downloads: nothing reaches us.
Labels, offcuts and saved jobs, in short
The limits and what each one keeps.
Labels and printers
Cutting labels print on plain A4 (8, 12 or 24 a sheet; the 24 fit 70 × 37 mm label sheets), on a 62 mm roll label printer (62 × 40 mm, Brother QL and the like) or on 4 × 6 in labels (Zebra and shipping printers). Without paying, 12 print per job; with Pro, all of them, each with its reference, size and QR code. They are on Cutting labels.
Offcuts: the rack
The rack keeps the offcuts you have left, and the next order is cut from them first. Free, it holds 25; with Pro, 400. It lives in your browser and goes into the My data backup and into the account's sync. Reaching the limit deletes nothing: you can take off the smallest to put a new one on. Offcut rack.
Saved jobs
Each optimiser saves one named job free and 50 with Pro. The glass optimiser also remembers by itself the last 20 orders worked out in this browser. Reaching the limit deletes nothing: you can save the new job in place of the old one. To send a job to someone or to another device, use «Copy a link to this order» on the glass optimiser: the job travels inside the link and is not stored on any server.
Contact
How do I write to you?
By e-mail, with the form below: it asks for the link to the job, what you expected and what happened, and writes the message in your e-mail program. With the link we see your pieces and your plan exactly as you see them. If you have no link, attach a screenshot or paste the list of pieces.
Address:
This page sends nothing: it opens your e-mail program with the message written, and you send it. Never include a password or the full card number; for a payment, the receipt number is enough.